Tall Favor Boxes ~ Easy Peasy!

These are so easy to make, really, much less difficult than I've made it look :) This is an older post, but I want to share again.

You get two boxes from one 8.5x11-inch sheet of cardstock. These boxes are a perfect size for a handful of candy, small toys, money, notes .. just about anything you would like to gift and want a cute presentation you can even personalize.

I made these Christmas boxes for my husband to give at work. I printed the watermark on the sheets before beginning. Four chocolate covered cherries in mini wrappers fit perfectly in each box. I tied a 10-inch piece of raffia on the fronts and BAM ... very easy, inexpensive gifts.

Below, these were made on a whim, experimenting with the embellishing. I used paper from a DCWV Luxury Stack. The flowers are three different size daisy punch-outs from leftover paper, glued and stacked with a bead in the center. I used a circle and square Coluzzle template to cut out the front piece(s) and covered with a piece of scrap cellophane inside.

The template is below. Use a 5.5x8.5 inch sheet of heavy cardstock. If you use a Scor-Pal, put the edge at the 3 inch and you have an exact 1-1/4 inch score mark at 4.25. Move your first score line back to the 3 and score again three more times. It doesn't matter which side of the template the 1/2" flap is located, either side will work. The flap is the first thing glued to the inside of the opposite edge when assembling the box. The only other piece to adhere is the bottom, and BAM .. your box is finished! How easy is that?

I'm a visual person, but if you like instructions here is a short version.  Score the 5.5" x8.5" sheet vertically, four times 1-1/4" apart with each score. Turn the sheet sideways and score 1-1/4" from one end and 1/2" (and 1-1/4" from that scoreline) on the other end.  The blue lines on the template are cut lines. The red dots indicate the pieces of the template that are cut and removed. I used a corner rounder punch for the top flap piece.

Glue the 1/2" flap to the inside of the opposite side. I use a tape runner, it is easy to get the flap lined up with the edge. Glue the bottom flaps down and you have a box!

Alternate Sizes

As I did in the first photo, you can make a shorter box (less area to fill with candy :) by trimming 1" and using a 5.5x7.5 inch piece. I have also made a wider size box substituting 2" scores for the 1-1/4" measurements (again using the 1/2" flap scores). Use a 8.5" x10" inch sheet for the larger size.The cutout in the front is optional.

It is easier than it looks, I promise. Let me know if you make any and what you use them for.

Enjoy!
-Molly